Looking for Logic LQD instructions?

The Logic LQD range from JTI is hitting the UK high streets in a big way, but many first time users want to know how to use the system before spending their hard earned cash on a new vaping system. Here at Cheapasmokes, you will find some of the lowest priced Logic LQD liquids in the UK, and also all the accessories you could need to get vaping.

So, how do you use the Logic LQD E-Liquid system?

Firstly lets look at the main features;

  • Leak proof mouthpiece
  • Refillable tank maximum 1.72ml
  • Replaceable atomiser
  • Rechargeable battery
  • 5 pin micro USB charger port

The Logic LQD system is designed to be used with Logic LQD e-E-Liquids only, and here at Cheapasmokes we advise on only using the correct liquids to prevent damage to the tank.

Logic LQD Instructions. On first use, the LQD atomiser needs priming or filling with several drops of Logic E-Liquid, which is explained in the manual.

Using the device.

On purchase of the Logic LQD tank, the battery may need charging to full capacity. On first use the Logic LQD atomiser will need priming to prevent dry burning. It is important to follow these instructions, if not the device will cease to function or you will experience a burning taste and the atomiser will need replacing.

You need to ensure the mouthpiece is screwed to the tank. Separate the from the battery. Hold the separated part upside down and unscrew the atomiser. Add 8 drops of Logic LQD E-Liquid into each semi circle hole, located on the top of the atomiser. If E-Liquid comes into contact with your skin, wash immediately with plenty of soap and water. Full instructions can be found inside the Logic LQD Tank device.

Filling your Logic LQD tank.

Step 1: The mouthpiece needs unscrewing from the tank device.

Step 2: Insert the nozzle of the LQD E-Liquid through the white silicone seal of the tank, being careful not to spill any on your hands. )The Logic E-Liquid is unique, so this should not happen). Fill the tank to the desired level being careful not to exceed the maximum level which is the silicone barrier.

Step 3: Screw the mouthpiece back onto the tank.

Logic LQD Instructions for charging the battery are simple. As with any modern device, the Logic tank is fitted with a mini USB port. By plugging in the power adaptor cable supplied, you can charge from any compatible USB port. Unplug the device once fully charged.

Check out the full range of Logic LQD products here: https://www.cheapasmokes.com/collections/logic-lqd

If you're looking for a simpler way to vape, why not look at the Logic Pro Capsule system: https://www.cheapasmokes.com/collections/logic-pro


A short sentence describing what someone will receive by subscribing